24-hour free consultation hotline: 13915468300

news

contact
zhangjiagang kaichuang machinery manufacturing co., ltd.
address: no. 888 jingang avenue, tangtang city, zhangjiagang
general manager: wei fengjuan 13915468300
sales department: 0512-58195998 / 0512-58193858
0512-56992273 / 0512-56360332
customer service department: 0512-58195998
fax: 0086-512-58190838
post code:215617
e-mail:1738138841@qq.com

corporate news

universal grinder structure-新全讯2网

author: comefrom: date:2018-03-19 12:49:55 hits:243
talk about the structure of universal crusher today, the following zhangjiagang kai chuang machinery manufacturing co., ltd. introduced the structure of universal crusher for everyone.
in recent years, with the improvement of technology, the universal chinese medicine crusher unit has a simple structure, firmness, stable operation, and good crushing effect. the inner wall of the casing has been machined to achieve a smooth surface, which has changed the phenomenon that the inner wall of the former model was rough and the powder was accumulated. food, chemical and other production more in line with national standards and meet the requirements of gmp.
however, in the process of use, the crushing of the universal crusher is one of the common faults in the use of the crusher and may have organic design problems, but more is due to improper use of the operation.
(1) the feed rate is too fast, the load increases, causing blockage. during the feeding process, it is necessary to pay attention to the deflection angle of the ammeter pointer at any time. if the rated current is exceeded, it indicates that the motor is overloaded and overloaded for a long time and the motor will be burned. this situation should be immediately reduced or closed the gate, you can also change the way feed, by adding feeders to control the amount of feed. because of the high speed of the universal crusher, the load is large, and the load fluctuation is strong. therefore, the current during the operation of the shredder is generally controlled at about 85% of the rated current.
(1) poor discharge of the discharge pipe or plugging of the feed too fast will block the tuyere of the universal crusher. improper matching with the conveying equipment will result in weakening of the discharge pipe or blocking of the air after it has no wind. after detecting a fault, it is necessary to clear the delivery port and change the unmatched conveying equipment to adjust the feeding amount so that the equipment can operate normally.
(3) hammer pieces, aging, mesh holes closed, broken, crushing the material with high water content will make universal crusher plugging. the broken and severely aged hammers should be regularly updated to maintain a good working condition of the crusher, and the screens should be inspected regularly. this will not only increase the production efficiency, but also make the universal crusher unblocked and enhance the reliability of the crusher.
welcome to choose zhangjiagang kaichuang machinery manufacturing co., ltd. the above about the structure of the universal grinder is organized by zhangjiagang kaichuang machinery manufacturing co., ltd.
next: intelligent dry granulation mechanism drug process
网站地图